Parts FITBIKECO | Shiv V.3

Our Goal Was To Design And Produce An Extremely Strong Fork With Plenty Of Tire Clearance. After 2 Years Of R&D And A Lot Of Investment In Tooling, The Shiv V.3 Is Available With A Quick 25Mm Offset. Here Are A Few Features That Make These Forks So Strong.

• Using Left And Right Specific Investment Cast Drop-Outs Instead Of Traditional Cr-Mo Plate, We’Ve Eliminated The Weld Gap On The Inside Of The Drops, And Were Able To Thicken Up The Drops Toward The Top Making A Much Stronger Drop-Out/Leg Connection.
• Seamless, Swaged Legs Provide More Strength Than Welded Or Fused Caps-Especially If Pegs Are Installed. The Ends Of These Legs Are Formed, Not Capped And Welded So There Is Nothing To Fracture.
• A Longer 166Mm Cnc’D Steerer Tube With Increased Wall Thicknesses Wherever Possible And A 24Mm X 1.5 Compression Cap With Integrated Race.
• Tapered And Butted Legs Provide Tons Of Strength, Crown Weld Surface, And Peg Clearance./Li>
• Post Weld 4Q Baked Heat-Treatment

Specs >

• Legs: Seamless Swaged (No Welded Cap)
• Dropouts: Investment Cast
• Steerer Tube: 1 Piece Cnc-Machined 4130 Crmo
• Steerer Tube Length: 166Mm
• Compression: M24 X 1.5 Thread – 6Mm Allen Slot
• Axle To Crown: 320Mm
• Offset: 25Mm
• Weight: 2.25 Lb (1.02 Kg)
• Heat Treat: 4Q Baked Post-Weld